Jekson Machinery

STANDARD SUPPLY :-

•Rigid Structure.             
•L M Guide ways and Ball screws
•Standard Make Controller with suitable Servo drive & Motor
•Main Drive Motor
•Electric control panel with INCH & SINGLE CYCLE AUTO OPERATION
•Fine stroke adjustment rod with Limit Switch
•Quick Change Punch & Die Adaptor
•Punch Set 2Nos. ( as per Your Requirement)
•CNC Controller - Delta/Taiwan/Schnider

Minimum order quantity: 1 Unit

Standard Features and Accessories: -
• Levers multiply force allowing smaller cylinders
• Ram parallel motion (synchronizing) by heavy-duty torsion tube
• Main drive motor complete with hydraulic power pack
• Front mounted tonnage indication adjustment device
• Fine stroke adjustment rod with limit switches
• Long adjustable stroke length with adjustable speed change point
• Three speed stroke cycle with fast approach-return and slow pressing
• Different stroke cycles for set-up trials (inching), production runs
• Pair of front sheet supports sheet while loading
• Slide-and-lock type manual back gauge with micro-adjustment & flip stops for reverse bends
• Movable operator console with on-off & emergency push buttons, cycle selector
• Switch, up-down foot switch for operation from convenient location
• Slide mounted control panel housing main electrical
• Pair lifting chains for powered lifting of die-block while changing sides for suitable V sizes
• One suitable 5 way Die and Punch. (Unhardened & Unground – Not covered under warranty)
• Centralized lubrication system with hand pump
• Comprehensive operation and maintenance manual
Page

STANDERD FEATURE:-

1.    Down Stroking, Electric/Hydraulic closed loop servo valve controlled.

2.    Two axis independent ram control (Y1 & Y2), ram is fully guided throughout the entire stroke, guides do not require lubrication and linear encoder for ram feedback and positioning                               

3.    High Speed , CNC Backgague(X), two finger stop with L.M. Guide are standard.

4.    Delem compact numerical control with simplified keyboard
        
5.    One set of Die & Punch harden & ground.

Standard Features and Accessories: -
• Levers multiply force allowing smaller cylinders
• Ram parallel motion (synchronizing) by heavy-duty torsion tube
• Main drive motor complete with hydraulic power pack
• Front mounted tonnage indication adjustment device
• Fine stroke adjustment rod with limit switches
• Long adjustable stroke length with adjustable speed change point
• Three speed stroke cycle with fast approach-return and slow pressing
• Different stroke cycles for set-up trials (inching), production runs
• Pair of front sheet supports sheet while loading
• Slide-and-lock type manual back gauge with micro-adjustment & flip stops for reverse bends
• Movable operator console with on-off & emergency push buttons, cycle selector
• Switch, up-down foot switch for operation from convenient location
• Slide mounted control panel housing main electrical
• Pair lifting chains for powered lifting of die-block while changing sides for suitable V sizes
• One suitable 5 way Die and Punch. (Unhardened & Unground – Not covered under warranty)
• Centralized lubrication system with hand pump
• Comprehensive operation and maintenance manual
Page

Minimum order quantity: 1 Unit

Standard Features and Accessories: -
• Levers multiply force allowing smaller cylinders
• Ram parallel motion (synchronizing) by heavy-duty torsion tube
• Main drive motor complete with hydraulic power pack
• Front mounted tonnage indication adjustment device
• Fine stroke adjustment rod with limit switches
• Long adjustable stroke length with adjustable speed change point
• Three speed stroke cycle with fast approach-return and slow pressing
• Different stroke cycles for set-up trials (inching), production runs
• Pair of front sheet supports sheet while loading
• Slide-and-lock type manual back gauge with micro-adjustment & flip stops for reverse bends
• Movable operator console with on-off & emergency push buttons, cycle selector
• Switch, up-down foot switch for operation from convenient location
• Slide mounted control panel housing main electrical
• Pair lifting chains for powered lifting of die-block while changing sides for suitable V sizes
• One suitable 5 way Die and Punch. (Unhardened & Unground – Not covered under warranty)
• Centralized lubrication system with hand pump
• Comprehensive operation and maintenance manual
Page

Established as a Pvt.Limited Company firm in the year 1995, we “Jekson Machinery Private Limited” are a leading Manufacturer of a wide range of Hydraulic Press, Cutting Machine, etc. Situated in Ahmedabad (Gujarat, India), we have constructed a wide and well functional infrastructural unit that plays an important role in the growth of our company.

Minimum order quantity: 1 Piece

In the year 1995 From a humble family , a modest beginning& with Great faith & the blessing of the almighty a small factory in an industrial gala the company started building their first model machine with 4 work men,& have now grown into a fully state of the art CNC equipments manufactures with nearly 100 work force &three sister concerns company.

Most of our customer from a single machine has now grown to a large organization with multiple of our machinery, more than 2000 machine are installed nationwide,Hundreds of satisfied customers &Thousands of happy machine operators using the machine 24 X 7 withstanding all arduous working environments.

Standard Features and Accessories: -

•  Levers multiply force allowing smaller cylinders
•  Ram parallel motion (synchronizing) by heavy-duty torsion tube
•  Main drive motor complete with hydraulic power pack
•  Front mounted tonnage indication adjustment device
•  Fine stroke adjustment rod with limit switches
•  Long adjustable stroke length with adjustable speed change point
•  Three speed stroke cycle with fast approach-return and slow pressing
•  Different stroke cycles for set-up trials (inching), production runs
•  Pair of front sheet supports sheet while loading
•  Slide-and-lock type manual back gauge with micro-adjustment & flip stops for reverse bends
•  Movable operator console with on-off & emergency push buttons, cycle selector
•  Switch, up-down foot switch for operation from convenient location
•  Slide mounted control panel housing main electrical
•  Pair lifting chains for powered lifting of die-block while changing sides for suitable V sizes
•  One suitable 5 way Die and Punch. (Unhardened & Unground – Not covered under warranty)
•  Centralized lubrication system with hand pump
•  Comprehensive operation and maintenance manual

Minimum order quantity: 1 Piece

Standard Features and Accessories: -

•  Levers multiply force allowing smaller cylinders
•  Ram parallel motion (synchronizing) by heavy-duty torsion tube
•  Main drive motor complete with hydraulic power pack
•  Front mounted tonnage indication adjustment device
•  Fine stroke adjustment rod with limit switches
•  Long adjustable stroke length with adjustable speed change point
•  Three speed stroke cycle with fast approach-return and slow pressing
•  Different stroke cycles for set-up trials (inching), production runs
•  Pair of front sheet supports sheet while loading
•  Slide-and-lock type manual back gauge with micro-adjustment & flip stops for reverse bends
•  Movable operator console with on-off & emergency push buttons, cycle selector
•  Switch, up-down foot switch for operation from convenient location
•  Slide mounted control panel housing main electrical
•  Pair lifting chains for powered lifting of die-block while changing sides for suitable V sizes
•  One suitable 5 way Die and Punch. (Unhardened & Unground – Not covered under warranty)
•  Centralized lubrication system with hand pump
•  Comprehensive operation and maintenance manual

Minimum order quantity: 1 Piece

Standard Features and Accessories: -

•  Levers multiply force allowing smaller cylinders
•  Ram parallel motion (synchronizing) by heavy-duty torsion tube
•  Main drive motor complete with hydraulic power pack
•  Front mounted tonnage indication adjustment device
•  Fine stroke adjustment rod with limit switches
•  Long adjustable stroke length with adjustable speed change point
•  Three speed stroke cycle with fast approach-return and slow pressing
•  Different stroke cycles for set-up trials (inching), production runs
•  Pair of front sheet supports sheet while loading
•  Slide-and-lock type manual back gauge with micro-adjustment & flip stops for reverse bends
•  Movable operator console with on-off & emergency push buttons, cycle selector
•  Switch, up-down foot switch for operation from convenient location
•  Slide mounted control panel housing main electrical
•  Pair lifting chains for powered lifting of die-block while changing sides for suitable V sizes
•  One suitable 5 way Die and Punch. (Unhardened & Unground – Not covered under warranty)
•  Centralized lubrication system with hand pump
•  Comprehensive operation and maintenance manual

Minimum order quantity: 1 Piece

In the year 1995 From a humble family , a modest beginning& with Great faith & the blessing of the almighty a small factory in an industrial gala the company started building their first model machine with 4 work men,& have now grown into a fully state of the art CNC equipments manufactures with nearly 100 work force &three sister concerns company.

Most of our customer from a single machine has now grown to a large organization with multiple of our machinery, more than 2000 machine are installed nationwide,Hundreds of satisfied customers &Thousands of happy machine operators using the machine 24 X 7 withstanding all arduous working environments.

We are head quartered at Ahmadabad with nationwide sales & service network

The guiding Philosophy of the company is to work hard, have innovative concept exceed customer s expectation manufacture outstanding product readily available & at an affordable price.

We strongly believe that our customer satisfaction & thus their loyalty are our success

I encourage you to experience the quality& the wide range of products with ever ready to serve attitude of our dedicated team of employees.

We welcome you to visit our factory for all your Sheet metal Cutting, Bending, Shearing& Joining Requirements

WE ARE AIMING AT YOUR PROBLEMS SURRENDER TO OURTECHNACIAL EXPERTISE

Thanking you for visiting our website & for considering our product & services

Help us to help u to build your organization 

Minimum order quantity: 1 Piece

Standard Features and Accessories: -

•  Levers multiply force allowing smaller cylinders
•  Ram parallel motion (synchronizing) by heavy-duty torsion tube
•  Main drive motor complete with hydraulic power pack
•  Front mounted tonnage indication adjustment device
•  Fine stroke adjustment rod with limit switches
•  Long adjustable stroke length with adjustable speed change point
•  Three speed stroke cycle with fast approach-return and slow pressing
•  Different stroke cycles for set-up trials (inching), production runs
•  Pair of front sheet supports sheet while loading
•  Slide-and-lock type manual back gauge with micro-adjustment & flip stops for reverse bends
•  Movable operator console with on-off & emergency push buttons, cycle selector
•  Switch, up-down foot switch for operation from convenient location
•  Slide mounted control panel housing main electrical
•  Pair lifting chains for powered lifting of die-block while changing sides for suitable V sizes
•  One suitable 5 way Die and Punch. (Unhardened & Unground – Not covered under warranty)
•  Centralized lubrication system with hand pump
•  Comprehensive operation and maintenance manual

Minimum order quantity: 1 Piece

In the year 1995 From a humble family , a modest beginning& with Great faith & the blessing of the almighty a small factory in an industrial gala the company started building their first model machine with 4 work men,& have now grown into a fully state of the art CNC equipments manufactures with nearly 100 work force &three sister concerns company.

Most of our customer from a single machine has now grown to a large organization with multiple of our machinery, more than 2000 machine are installed nationwide,Hundreds of satisfied customers &Thousands of happy machine operators using the machine 24 X 7 withstanding all arduous working environments.

We are head quartered at Ahmadabad with nationwide sales & service network

The guiding Philosophy of the company is to work hard, have innovative concept exceed customer s expectation manufacture outstanding product readily available & at an affordable price.

We strongly believe that our customer satisfaction & thus their loyalty are our success

I encourage you to experience the quality& the wide range of products with ever ready to serve attitude of our dedicated team of employees.

We welcome you to visit our factory for all your Sheet metal Cutting, Bending, Shearing& Joining Requirements

WE ARE AIMING AT YOUR PROBLEMS SURRENDER TO OURTECHNACIAL EXPERTISE

Thanking you for visiting our website & for considering our product & services

Help us to help u to build your organization 

Minimum order quantity: 1 Piece

Standard Features and Accessories: -

•  Levers multiply force allowing smaller cylinders
•  Ram parallel motion (synchronizing) by heavy-duty torsion tube
•  Main drive motor complete with hydraulic power pack
•  Front mounted tonnage indication adjustment device
•  Fine stroke adjustment rod with limit switches
•  Long adjustable stroke length with adjustable speed change point
•  Three speed stroke cycle with fast approach-return and slow pressing
•  Different stroke cycles for set-up trials (inching), production runs
•  Pair of front sheet supports sheet while loading
•  Slide-and-lock type manual back gauge with micro-adjustment & flip stops for reverse bends
•  Movable operator console with on-off & emergency push buttons, cycle selector
•  Switch, up-down foot switch for operation from convenient location
•  Slide mounted control panel housing main electrical
•  Pair lifting chains for powered lifting of die-block while changing sides for suitable V sizes
•  One suitable 5 way Die and Punch. (Unhardened & Unground – Not covered under warranty)
•  Centralized lubrication system with hand pump
•  Comprehensive operation and maintenance manual

Minimum order quantity: 1 Piece

Standard Features and Accessories: -

•  Levers multiply force allowing smaller cylinders
•  Ram parallel motion (synchronizing) by heavy-duty torsion tube
•  Main drive motor complete with hydraulic power pack
•  Front mounted tonnage indication adjustment device
•  Fine stroke adjustment rod with limit switches
•  Long adjustable stroke length with adjustable speed change point
•  Three speed stroke cycle with fast approach-return and slow pressing
•  Different stroke cycles for set-up trials (inching), production runs
•  Pair of front sheet supports sheet while loading
•  Slide-and-lock type manual back gauge with micro-adjustment & flip stops for reverse bends
•  Movable operator console with on-off & emergency push buttons, cycle selector
•  Switch, up-down foot switch for operation from convenient location
•  Slide mounted control panel housing main electrical
•  Pair lifting chains for powered lifting of die-block while changing sides for suitable V sizes
•  One suitable 5 way Die and Punch. (Unhardened & Unground – Not covered under warranty)
•  Centralized lubrication system with hand pump
•  Comprehensive operation and maintenance manual

Minimum order quantity: 1 Piece

In the year 1995 From a humble family , a modest beginning& with Great faith & the blessing of the almighty a small factory in an industrial gala the company started building their first model machine with 4 work men,& have now grown into a fully state of the art CNC equipments manufactures with nearly 100 work force &three sister concerns company.

Most of our customer from a single machine has now grown to a large organization with multiple of our machinery, more than 2000 machine are installed nationwide,Hundreds of satisfied customers &Thousands of happy machine operators using the machine 24 X 7 withstanding all arduous working environments.

We are head quartered at Ahmadabad with nationwide sales & service network

The guiding Philosophy of the company is to work hard, have innovative concept exceed customer s expectation manufacture outstanding product readily available & at an affordable price.

We strongly believe that our customer satisfaction & thus their loyalty are our success

I encourage you to experience the quality& the wide range of products with ever ready to serve attitude of our dedicated team of employees.

We welcome you to visit our factory for all your Sheet metal Cutting, Bending, Shearing& Joining Requirements

WE ARE AIMING AT YOUR PROBLEMS SURRENDER TO OURTECHNACIAL EXPERTISE

Thanking you for visiting our website & for considering our product & services

Help us to help u to build your organization 

Minimum order quantity: 1 Piece

We are manufacturer and exporter of all kind of CNC, NC & Conventional Hydraulic Press brakes, Shear, Presses, Plasma, Oxy Fuel, Water jet & Robotic Automations and other related engineering products.

 We are major contributors in the recent and ongoing developments in sheet metal forming cutting, joining and construction industries nation wide

Minimum order quantity: 1 Piece

In the year 1995 From a humble family , a modest beginning& with Great faith & the blessing of the almighty a small factory in an industrial gala the company started building their first model machine with 4 work men,& have now grown into a fully state of the art CNC equipments manufactures with nearly 100 work force &three sister concerns company.

Most of our customer from a single machine has now grown to a large organization with multiple of our machinery, more than 2000 machine are installed nationwide,Hundreds of satisfied customers &Thousands of happy machine operators using the machine 24 X 7 withstanding all arduous working environments.

We are head quartered at Ahmadabad with nationwide sales & service network

The guiding Philosophy of the company is to work hard, have innovative concept exceed customer s expectation manufacture outstanding product readily available & at an affordable price.

We strongly believe that our customer satisfaction & thus their loyalty are our success

I encourage you to experience the quality& the wide range of products with ever ready to serve attitude of our dedicated team of employees.

We welcome you to visit our factory for all your Sheet metal Cutting, Bending, Shearing& Joining Requirements

WE ARE AIMING AT YOUR PROBLEMS SURRENDER TO OURTECHNACIAL EXPERTISE

Thanking you for visiting our website & for considering our product & services

Help us to help u to build your organization 

Minimum order quantity: 1 Piece

In the year 1995 From a humble family , a modest beginning& with Great faith & the blessing of the almighty a small factory in an industrial gala the company started building their first model machine with 4 work men,& have now grown into a fully state of the art CNC equipments manufactures with nearly 100 work force &three sister concerns company.

Most of our customer from a single machine has now grown to a large organization with multiple of our machinery, more than 2000 machine are installed nationwide,Hundreds of satisfied customers &Thousands of happy machine operators using the machine 24 X 7 withstanding all arduous working environments.

We are head quartered at Ahmadabad with nationwide sales & service network

The guiding Philosophy of the company is to work hard, have innovative concept exceed customer s expectation manufacture outstanding product readily available & at an affordable price.

We strongly believe that our customer satisfaction & thus their loyalty are our success

I encourage you to experience the quality& the wide range of products with ever ready to serve attitude of our dedicated team of employees.

We welcome you to visit our factory for all your Sheet metal Cutting, Bending, Shearing& Joining Requirements

WE ARE AIMING AT YOUR PROBLEMS SURRENDER TO OURTECHNACIAL EXPERTISE

Thanking you for visiting our website & for considering our product & services

Help us to help u to build your organization 

A hydraulic press is a system that uses hydraulic power to generate compressive forces for general engineering purposes. This has applications in a variety of engineering fields. It is used in moulding, punching, deep drawing, forming, and other engineering applications.

A typical Hydraulic Forging Press is composed of a strong structure that houses the hydraulic system, reservoir, control panel, platform, piston or ram, and can be designed to handle multiple loads. They are classified according to the press's structure or the application for which it was designed.

Presses are designed and developed in close collaboration with our customers to offer them the most efficient combination of specifications for a better work cycle with our presses.
STANDARD SUPPLY :-

•Rigid Structure.             
•L M Guide ways and Ball screws
•Standard Make Controller with suitable Servo drive & Motor
•Main Drive Motor
•Electric control panel with INCH & SINGLE CYCLE AUTO OPERATION
•Fine stroke adjustment rod with Limit Switch
•Quick Change Punch & Die Adaptor
•Punch Set 2Nos. ( as per Your Requirement)
•CNC Controller - Delta/Taiwan/Schnider

STANDARD SUPPLY :-

•Rigid Structure.             
•L M Guide ways and Ball screws
•Standard Make Controller with suitable Servo drive & Motor
•Main Drive Motor
•Electric control panel with INCH & SINGLE CYCLE AUTO OPERATION
•Fine stroke adjustment rod with Limit Switch
•Quick Change Punch & Die Adaptor
•Punch Set 2Nos. ( as per Your Requirement)
•CNC Controller - Delta/Taiwan/Schnider

Standard Features and Accessories: -

•  Levers multiply force allowing smaller cylinders
•  Ram parallel motion (synchronizing) by heavy-duty torsion tube
•  Main drive motor complete with hydraulic power pack
•  Front mounted tonnage indication adjustment device
•  Fine stroke adjustment rod with limit switches
•  Long adjustable stroke length with adjustable speed change point
•  Three speed stroke cycle with fast approach-return and slow pressing
•  Different stroke cycles for set-up trials (inching), production runs
•  Pair of front sheet supports sheet while loading
•  Slide-and-lock type manual back gauge with micro-adjustment & flip stops for reverse bends
•  Movable operator console with on-off & emergency push buttons, cycle selector
•  Switch, up-down foot switch for operation from convenient location
•  Slide mounted control panel housing main electrical
•  Pair lifting chains for powered lifting of die-block while changing sides for suitable V sizes
•  One suitable 5 way Die and Punch. (Unhardened & Unground – Not covered under warranty)
•  Centralized lubrication system with hand pump
•  Comprehensive operation and maintenance manual

Minimum order quantity: 1 Piece

Standard Features and Accessories: -

•  Levers multiply force allowing smaller cylinders
•  Ram parallel motion (synchronizing) by heavy-duty torsion tube
•  Main drive motor complete with hydraulic power pack
•  Front mounted tonnage indication adjustment device
•  Fine stroke adjustment rod with limit switches
•  Long adjustable stroke length with adjustable speed change point
•  Three speed stroke cycle with fast approach-return and slow pressing
•  Different stroke cycles for set-up trials (inching), production runs
•  Pair of front sheet supports sheet while loading
•  Slide-and-lock type manual back gauge with micro-adjustment & flip stops for reverse bends
•  Movable operator console with on-off & emergency push buttons, cycle selector
•  Switch, up-down foot switch for operation from convenient location
•  Slide mounted control panel housing main electrical
•  Pair lifting chains for powered lifting of die-block while changing sides for suitable V sizes
•  One suitable 5 way Die and Punch. (Unhardened & Unground – Not covered under warranty)
•  Centralized lubrication system with hand pump
•  Comprehensive operation and maintenance manual